Reducing tees are identified by their run sizes first, followed by the branch size. For example, a tee labeled 2 x 2 x 1 means the two straight run openings are 2 inches and the side branch is 1 inch.
A pipe tee is a fitting shaped like the letter T. It has three openings: two in a straight line (the run) and one at a 90-degree angle (the branch). It is the primary way to create a branch line in a piping layout.
A sanitary tee is used in waste systems. It features a curved branch designed to allow solids to flow smoothly downward without clogging. Unlike standard pressure tees, these must be installed in a specific orientation to work correctly.
Yes. While often used to split flow, a tee can also act as a mixing point where two separate lines enter the run and branch to exit through a single opening.
An equal tee has three openings of the same diameter. A reducing tee has a branch opening that is smaller than the run openings, allowing for a smaller pipe to be connected to a larger main line without using extra reducers.
A wye has a 45-degree branch instead of a 90-degree branch. Wyes are preferred in drainage or high-velocity systems where a sharp 90-degree turn would cause too much turbulence or increase the risk of a blockage.
A bullhead tee is a specialized fitting where the branch opening is larger than the run openings. These are used in systems where the branch line requires a higher volume of flow than the individual supply lines.
B2B & B2C Business Directory & Yellow Pages of India for Manufacturers, Exporters, Importers, Supplers, Traders, Wholesale Suppliers, Stockist, General Venders, Service Providers etc. We offer Digital Marketing, Online Branding, Search Engine Optimization for Micro, Small, Medium & Large Enterprises. If your business physically located in any parts of India, you can register with us today. Mumbai | Delhi | Bangalore | Hyderabad | Ahmedabad | Chennai | Kolkata | Chennai | Surat | Pune | Jaipur | Lucknow
